A driver Power State Failure in Windows 10 can leave you not knowing what to do. The biggest frustration with this state of affairs is that it could easily render your computer unusable. This could leave you locked outside your computer and messing around with any data you have not saved. If this is the only PC you have access to, it may also leave you unable to work. The good news is that this problem can often be solved by following a few steps.
What Causes Driver Power Failures in Windows 10
The problem of Driver Power Failures in Windows 10 is usually related to a situation where the computer or device you are using suddenly goes into sleep mode while you are still working on it. When a computer is in sleep mode, it should come back to life when a command to do so has been given by Windows. However, the problem comes around when your personal computer or device fails to respond to this command. This is the instance when Windows shows the error relating to Driver Power Failure. Two things that can cause this error can be related to the drivers or the power settings.
First Try a Restart
A driver Power State Failure in Windows 10 can usually easily be solved by doing a restart of your computer. While it is always easy to have, the problem fixed using this simple method, it is not always effective. This is when you will need to look at other fixes available. Even the other fixes that are recommended are not necessarily guaranteed to work. However, you will not know whether they will work until you try them. Always remember that whatever will help you fix your system, is related to whatever caused it.
Update the Divers
Updating the drivers on your computer has proved to be another effective way to fix this problem in Windows 10. To update the drivers, you will need to start by going to the control panel. Once you are inside the control panel, look for System and Security. Click on System. On the left side of your screen, you will then click Device Manager and open it.
It is snow time to expand and then check every segment of devices. If there happens to be an exclamation mark in yellow in front of a given device, you will need to right-click on it with the aim of updating the drivers. When the latest drivers have been downloaded, and installed on your PC, you will need to restart the computer. Check if the error has been resolved.
If the problems associated with driver Power State Failure in Windows 10 on your PC start to give you headaches, you may want to take the proactive approach. You will need to review the software market and see if you can get something like DriverAssist from SafeBytes. This software will scan your system and manage your drivers on your behalf, making sure that you always have the latest versions.