Users have the option to get the Windows program to download automatically. There will be detailed information about not only the devices, but also the hardware systems that will be used. By following this protocol, you can ensure that there are no compatibility issues and that each device and driver works as intended by the manufacturer. Windows is configured in such a way to be able to search for and download a pair of differing updates for the devices that are attached to your PC. You can use one or the other depending on your needs.

Perhaps, it is a good idea to understand what a driver does. This is basically a conduit through which the overall PC can communicate with any hardware devices that you have attached to it. The Windows program automatically checks for the relevant drivers, since they are critical to the peripheral operations of the computer. The process is typically triggered the moment that you connect a new device. There are cases, where past drivers that you have used are available. Sometimes, these are not updated automatically with the new device and that can cause secondary compatibility issues, because one of the core elements has become obsolete.

Using the control panel to configure the system

Visit the Windows Update interface and then drill down to the control panel. Ensure that you have checked for all the available updates. View them and cross check the compatibility of basic information. Windows is designed to provide you with detailed information about the product name, model number and manufacturer. At other times, it may even tell you about the sync capabilities of the device. In that way, you are able to filter out the devices that are new from those that are old, even if they come from the same broad category.

The system will allow you to check the Windows update in order to see whether there are any new icons or drivers that have been made available. Setting the checks, so that they are automatic could not be any easier. First open the tab for devices and printers. This is accessed via the start button on the start menu. Right click on the name that was given to your computer and then click on the option to change the device installation settings. Agree to the option to do it automatically, because it is the recommended one, particularly for those who are not well versed in the use of the system. Remember that you must log in as an administrator in order to be given access to these menus. Once you have set up the automatic checks then you have effectively reduced the risk of using obsolete programs.

Correct Configuration

Turn on the automatic update and configure according to the prompts that are part of the dialogue box. The problem is that you may not be able to pick up the optional updates. However, you are given notices and you should act on them. You can configure Windows to accept all the available updates regardless of whether they are optional or essential.